ホーム > English Home > Our products > Twin band saw with 2-sides log clamp

Twin band saw with 2-sides log clamp

Delivery record as of April, 2019 : 200 sets

The most popular machine!!

| ROBOT | PP | PR | PRA | AS | MS

Robot twin band saw

Fully automated machine with log shape scanner.

ロボットツインバンドソー

Technical Data

Log is rotated 360 degrees and the shape is measured by 5 sensors. Computer analyzes the data to set the log into best position for sawing. Sawing pattern is set automatically using board sizes and each size priority, set by operator.

Log diameter max. 50cm bottom end
Log diameter min. 13cm top end
Log length

3m(2950-3200mm)

4m(3950-4200mm)

Type PP

■  Short cycle time and high speed of cutting.

        

Technical Data

Center timber is unloaded in the back of saw unit. While the carriage is going back, operator has time to rotate and position the next log. Loss time is minimized. 

Log diameter max. 50cm bottom end
Log diameter min. 10cm top end
Log length

3m(2950-3200mm)

4m(3950-4200mm)

Type PR

■ Machine with a pre-set device to position the next log.

        

Technical Data

Operator chooses the sawing pattern from data input in memory according to log diameter and shape. After the cutting starts, next log is rotated and set to the best position for sawing. When the center timber discharged, pre-set device slides to charge the next log. Minimum time loss, high yield.  

Log diameter max. 50cm bottom end
Log diameter min. 13cm top end
Log length

3m(2950-3200mm)

4m(3950-4200mm)

6m(5950-6200mm)

Type PRA

■ Sawing pattern set by operator, 90 degrees rotation is done automatically. 

Technical Data

 Operator positions the log using a pre-set device. After the log is set on carriage, the 90 degree turn of center timber is done automatically to shorten the cycle time.

 

Log diameter max. 50cm bottom end
Log diameter min. 13cm top end
Log length

3m(2950-3200mm)

4m(3950-4200mm)

Type AS

■ Simple and reliable machine for medium to big diameter log

AS型ツインバンドソー

Technical Data

Positioning of log is selected by operator in front of sawing unit. Center timber is discharged at the same time as next log in loaded. Machine of AS type with bigger saw wheels available for logs up to 80cm. Simple operation, reliability, low investment cost. 

Log diameter max. 50cm bottom end
Log diameter min. 16cm top end
Log length

3m(2950-3200mm)

4m(3950-4200mm)

Type MS

■ Manual position machine for small diameter logs

AS型ツインバンドソー

Technical Data

Operator rotates the log manually to set the sawing position. Simple machine with low automation for small logs cutting.

 

Log diameter max. 30cm bottom end
Log diameter min. 12cm top end
Log length

3m(2950-3200mm)

4m(3950-4200mm)

Please feel free to contact us.

OI.INNOVATION Co., LTD

Nakagawa 218, Shimada-shi, Shizuoka-ken,

Japan 427-0103

+81-547-38-2141
Contact us via e-mail
PageTop